Directions for Using GranQuartz 135M

Routine Cleaning:

1. Remove any loose dirt or dust with a broom or dust mop.
2. Prepare solution using 2 to 3 oz. of 135M per gallon of clean water (mix only 1 to 2 gallons at a time). Do not exceed 3 oz. per gallon of water.
   
3. Use a sponge or microfiber mop dedicated to 135M only, soak mop and wring well. Apply product to surface and agitate. Rinse and re-soak mop often and change solution when it appears soiled. DO NOT RINSE
4. Occasional deep cleaning with GranQuartz 631C is recommended, depending on traffic volume and seasonal conditions

Autoscrubbers:

1. Add 135M to the solution tank at a rate of 1 oz per gallon of clean water
2. Regulate the metering valve so that the flow of solution wets the floor but does not pool
3. Allow squeegee to drop but do not lock
4. With vacuum turned on, move scrubber over surface in long, straight lines. Non-abrasive nylon pads or soft brushes may be used