 |
 |
 |
|
PRODUCT NOTES:
- Lithofin
FZ Stain Stop <W> is an water-based impregnator (sealer) designed to stop dirt retention in porcelain tiles and grout.
- For architectural specifications, Lithofin
FZ Stain Stop <W> may be substituted for GranQuartz 433P.
- Tiles and grout lines must be cleaned with GranQuartz 631C prior to sealing with Lithofin
FZ Stain Stop <W>.
- Lithofin FZ Cleanser should be used for the routine cleaning of tiles treated with Lithofin
FZ Stain Stop <W>.
- This product has no impact on the slip resistance of flooring surfaces.
- 1 Liter coverage is 450 to 750 square feet, depending on surface porosity.
Porcelain floor tiles can be some of the toughest surfaces to keep looking their best. While they are not susceptible to deep stain penetration, acid etching, or scratching from routine contact like natural stones, they do provide one significant maintenance challenge - dirt retention. Whether polished or unpolished, many porcelain materials have ultra fine pores that allow dirt, grease, oil, and cleaning solution residue to accumulate just below the surface, making them extremely difficult clean. If your porcelain tiles exhibit any of the following symptoms, you will need to deep clean them with GranQuartz 631C and seal (impregnate) the surface with Lithofin
FZ Stain Stop <W>: - Dirty areas that you cannot get clean using routine methods, no matter how hard you scrub.
- Areas that will not stay clean - you get the tiles clean, but they quickly start to retain dirt.
- Visible dulling or "greying" of tile surfaces - tiles are darker in color than when first installed.
Lithofin
FZ Stain Stop <W> Porcelain Floor Impregnator provides the highest quality dirt retention protection available
for porcelain tile and grout. It is specifically formulated to penetrate and seal high density porcelains, and is suitable for all porcelain finish types. Lithofin
FZ Stain Stop <W> effectively seals the ultra fine pores in all porcelain surfaces, and blocks dirt, oil, grease, and grime from becoming embedded in the surface.
Lithofin
FZ Stain Stop <W> is strong enough for commercial use in food service areas, lobbies, and restrooms, yet is both safe and effective for home use.Routine cleaning of porcelain floors sealed with Lithofin
FZ Stain Stop <W> should be performed using Lithofin FZ Cleanser (an excellent choice!)
Directions for Using Lithofin
FZ Stain Stop <W> Porcelain Floor Impregnator
- Clean surface with GranQuartz Stone Care Systems 631C.
- Allow surface to dry completely (at least 2 hours) before impregnation
treatment.
- Protect all sensitive surfaces adjoining the work area.
- Apply
a thin and even coat of Lithofin
FZ Stain Stop <W> undiluted directly to tiles and grout
lines using a lambs wool applicator, brush, or roller. Distribute
evenly. Work in a manageable area.
- Allow 5 minutes for maximum penetration. Do not allow impregnator to dry on
surface.
- Completely remove all excess product from surface using a squeegee or towel.
No product should remain on the surface.
- Repeat the procedure
(steps 2-6) until the entire surface is completed.
Floor may be opened for light foot traffic after 4 hours. Keep floor water and oil free for at least 24 hours; full cure is achieved after 48 hours.Lithofin FZ Cleanser should be used for cleaning of porcelain floors sealed with Lithofin
FZ Stain Stop <W>.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Stops Dirt Retention Problems on Porcelain Floors
- Effective on Both Polished and Unpolished Porcelains
- Also Acts as a Grout Sealer (Impregnator)
- Very Low Odor
- Water Based, VOC Compliant
- For Both Home and Commercial Use
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
