THIS PRODUCT IS FOR STORAGE, HANDLING, USE, AND DISPOSAL
BY EXPERIENCED PROFESSIONALS ONLY!
Stone Pro Maintemance Crystallizer is
a unique polishing liquid containing a unique, proprietary
silicofluoride compound that creates a reflective crystallized surface
on marble. It also provides enhanced coloration and and improved stone
density, slip resistance, and surface durability. This product performs
as well (and in some instances better) than the high-end Spanish
brands, at a fraction of the cost. One gallon will cover approximately 1,000 to 3,000 ft.˛ dependant on severity of damage to the
marble surface and amount of product used at one time. Do not dilute.
Marble Polish SECTION I -PRODUCT IDENTIFICATION
TRADE NAME:Stone Pro Maintenance Crystallizer PRODUCT CODE:SPMC
CHEMICAL NAME:Acrylic blend CAS #:Blend,no single CAS #applies
DOT HAZARD CLASS:UN 2856 DATE:February 19,2005
SECTION II -HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS CAS #TLV (UNITS)PEL
Sodium Hexa fluorosilicate 16949658 2.5 MG/M3 2.5 MG/M3
SECTION III -PHYSICAL DATA
BOILING POINT:(F)212 SOLUBILITY:Complete pH:.5-2.0
VOC:30 g/L VAPOR DENSITY:N/A VAPOR PRESSURE:N/A
EVAPORATION RATE (WATER =1);>1 SPECIFIC GRAVITY:1.1
APPEARANCE &ODOR:Opaque pink liquid with acrid odor.
SECTION IV -FIRE AND EXPLOSION HAZARD INFORMATION
FLASH POINT:N/A
FLAMMABLE LIMITS:N/A LOWER:N/A UPPER:N/A
FIRE/EXPLOSION HAZARDS:None
EXTINGUISHING MEDIA:Foam,CO2,dry chemical
FIRE FIGHTING PROCEDURES:Fire fighters should wear self-contained breathing apparatus and full protective cloth-
ing.Use water spray to cool nearby containers and structures exposed to fire.
SECTION V -HEALTH HAZARD INFORMATION
PERMISSIBLE EXPOSURE LEVEL:ND
EYES:Will cause irritation and redness.
SKIN:Severe irritation.
INHALATION:Inhalation of mist may cause respiratory irritation.
INGESTION:Will cause severe gastrointestinal irritation.
THIS MATERIAL IS NOT LISTED AS A CARCINOGEN BY IARC,NTP OR OSHA
HMIS HAZARD CLASS:Health =3 Flammability =0 Reactivity =0 Other =NA
Ranking:0 =Least 1 =Slight 2 =Moderate 3 =High 4 =Extreme
FIRST AID
EYE CONTACT:Flush with water for 15 minutes lifting eyelids.Get medical attention immediately
SKIN CONTACT:Wash with water and treat with any moisturizing cream.
INHALATION:Remove victim to fresh air.Administer arti ficial respiration if breathing ceases.Get medical attention
immediately.
INGESTION:Do not induce vomiting.Give lots of water.Give milk of magnesia.Call a physician.
SECTION VI -REACTIVITY INFORMATION
STABILITY:Stable
REACTIVITY:None will occur
HAZARDOUS DECOMPOSITION INGREDIENTS:N/A
HAZARDOUS POLYMERIZATION:Will not occur
SECTION VII -SPILL,LEAK AND DISPOSAL PROCEDURES
SMALL SPILLS:Mop,sweep or absorb.Transport to non-hazardous land fill.
LARGE SPILLS:Mop,sweep,or absorb.Transport to non-hazardous land fill.
DISPOSAL:Dispose of in accordance with federal,state,and local regulations.
SECTION VIII -SPECIAL PROTECTIVE EQUIPMENT
Wear chemical splash goggles.
Vinyl,rubber,or nitrile gloves should be used.
RESPIRATORY:Provide OSHA approved mists respirator.
VENTILATION:Local mechanical ventilation to keep TLV ’S below recommended levels.
OTHER:Wear protective apron,boots,and clothing.
SECTION IX -SPECIAL PRECAUTIONS
STORAGE:Store in cool dry well ventilated place
HANDLING:Avoid strong oxidizers and ammonia.
LEGEND:ND,Not Determined;N/A Not Applicable;NA,Not Available.
NOTICE
All information appearing herein is based upon data obtained from chemical manufacturers and or recognized
technical sources.While the information is believed to be accurate,Snyder Manufacturing Corporation makes no
representations as to its accuracy or suf ficiency.Conditions of use are beyond Snyder Manufacturing Corporation ’s
control and therefore users are responsible for and assume all risks of their use,handling,and disposal of the prod-
uct,or from the publication or use of,or reliance upon,information contained herein.This information relates only
to the product designated herein,and does not relate to its use in combination with any other material or in any
other process
|
