SECTION I - PRODUCT IDENTIFICATION
TRADE NAME: Crystal Clean PRODUCT CODE: CC
CHEMICAL NAME: Detergent CAS #: N/A mixture DOT HAZARD CLASS: N/A DATE: October 9, 2004
DOT SHIPPING NAME: Cleaning compound Non Hazardous

SECTION II - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS CAS # TLV (UNITS) PEL
The ingredients in this product are generally recognized as non-hazardous, non-toxic, and non-restricted.

SECTION III - PHYSICAL DATA
BOILING POINT: (F) 212 SOLUBILITY: 90% pH: 7.8
PERCENT VOLATILE: ND VAPOR DENSITY: ND VAPOR PRESSURE: <30
EVAPORATION RATE (BUTYL ACETATE = 1): ND SPECIFIC GRAVITY: 1.00
APPEARANCE & ODOR: Light blue clear liquid mild odor.

SECTION IV - FIRE AND EXPLOSION HAZARD INFORMATION
FLASH POINT: N/A
FLAMMABLE LIMITS: N/A LOWER: N/A UPPER: N/A
FIRE/EXPLOSION HAZARDS: None
EXTINGUISHING MEDIA: Foam, CO2, dry chemical
FIRE FIGHTING PROCEDURES: Fire fighters should wear self-contained breathing apparatus and full protective clothing. Use water spray to cool nearby containers and structures exposed to fire.

SECTION V - HEALTH HAZARD INFORMATION
PERMISSIBLE EXPOSURE LEVEL: ND
EYES: Slight irritation
SKIN: None under normal conditions.
INHALATION: None under normal conditions.
INGESTION: Ingesting large quantities may cause nausea.
THIS MATERIAL IS NOT LISTED AS A CARCINOGEN BY IARC, NTP OR OSHA
HMIS HAZARD CLASS: Health = 0 Flammability = 0 Reactivity =0 Other =NA
Ranking: 0 = Least 1 = Slight 2 = Moderate 3 = High 4 = Extreme
FIRST AID
EYE CONTACT: Flush with water for 20 minutes lifting eyelids. Get medical attention immediately
SKIN CONTACT: Immediately flush skin with water for 20 minutes. Remove and launder contaminated clothing before use.
INHALATION: Remove victim to fresh air. Administer artificial respiration if breathing ceases. Get medical attention immediately.
INGESTION: Do not induce vomiting. Give lots of water, if conscious. Get medical attention immediately.

SECTION VI - REACTIVITY INFORMATION
STABILITY: Stable
REACTIVITY: None will occur
HAZARDOUS DECOMPOSITION INGREDIENTS: As with any organic material, CO AND CO2 may be expected as by-products of combustion.
HAZARDOUS POLYMERIZATION: Will not occur.

SECTION VII - SPILL, LEAK AND DISPOSAL PROCEDURES
SMALL SPILLS: Absorb with an inert material such as sand or Vermiculite and sweep up and dispose of in accordance with federal, state, and local regulations.
LARGE SPILLS: Absorb with and inert material such as sand or Vermiculite and sweep up and dispose of in accordance with federal, state, and local regulations.
DISPOSAL: Dispose of in accordance with federal, state, and local regulations.

SECTION VIII - SPECIAL PROTECTIVE EQUIPMENT
EYE AND FACIAL: None required under normal conditions.
SKIN: None required under normal conditions.
RESPIRATORY: None required under normal conditions.
VENTILATION: Local mechanical ventilation to keep TLVʼS below recommended levels.
OTHER: None required under normal conditions.

SECTION IX - SPECIAL PRECAUTIONS
STORAGE: Store in cool, dry, well-ventilated place.
HANDLING: No special needs.
LEGEND: ND, Not Determined; N/A Not Applicable; NA, Not Available.

NOTICE
All information appearing herein is based upon data obtained from chemical manufacturers and or recognized technical sources. While the information is believed to be accurate, Snyder Manufacturing Corporation makes no representations as to its accuracy or sufficiency. Conditions of use are beyond Snyder Manufacturing Corporationʼs control and therefore users are responsible for and assume all risks of their use, handling, and disposal of the product, or from the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein, and does not relate to its use in combination with any other material or in any other process